ETM-200N Single Column Computerized Electronic Universal Tensile Testing Machine
1.Application:
Single Column Test Machines are ideal for tension and compression applications where test force requirements are up to 5 kN with speeds available to 1000 mm/min. This series is required for high travel or high extension test applications such as rubber tensile testing and tensile testing of medical devices such as catheters.
2.Standard:
2.1 ASTM D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
2.2 ISO 6892-1:2016:Metallic materials — Tensile testing as universal test
2.3 ISO 75001 Part 1: Tension/compression testing machines -- Calibration and verification of the force-measuring system
2.4 ASTM E4 - 16 Standard Practices for Force Verification of Testing Machines
3.Main Technical Parameters:
| Model | ETM-200N |
| Max. load | 200N |
| Structure | Single column, table model |
| Control method | Computer control |
| Load accuracy | Class 1 (class 0.5 optional) |
| Load range | 1%-100% FS (0.4%-100% FS optional) |
| Deformation measurement range | 0.2%-100% |
| Displacement Resolution | 0.01mm |
| Test speed | 0.05-1000mm/min |
| Crosshead travel space | 1100mm |
| Tensile space | 900mm |
| Power supply | AC220V±10%,50Hz |
| Grips | Corrugated grip |
| Dimension | 450*400*1680mm |
| Extensometer | Electronic Extensometer optional |
| Weight | around 110 kg |
4. Main Unit Feature:
4.1 Automatic stop: After the sample broken, automatic stop.
4. 2 Display: Real-time display testing force, displacement, testing speed, peak value, testing status on one LCD.
4.3 Automatic return: automatic return to initial position when testing finished.
4.4. Limiting protection: Program control and Mechanical limiting protection.
4.5 High accuracy photoelectric encoder to measure the displacement
4.6 High accuracy load cell to measure the test load
4.7 Ball screw no backlash to guarantee the low noise and high driving efficiency
4.8 Thousands of test fixture can be used according to different test request
5. Data Acquisition System
5.1 The data acquisition system of machine consists of two high precision A/D conversion channel and the maximum resolution should be 1/300000 (minimum)
5.2 USB powered data –logger with USB 2.0 and RS- 232 pc interface, 5-keys joystick, 2MB RAM, Automatic recognition facility, Internal signal generator and 12-bit conversion resolution
6. Software Features
61 Batch and report processing program facility in doc and exl format
6.2 The software is fully compliance with the corresponding international standards like ISO, ASTM and GB standards.
word and excel
6.3 The control mode of software should contain constant force, constant displacement, constant deformation and others like Stress - strain, force - displacement, force - time, displacement – time
6.4 It supports multiple load cell and extensometer
6.5 Reserved data interface facility, which can be directly connected to integrated management network of laboratory.
6.6 The software is for Windows98/2000/XPAV in7 or higher
6.7 The software supports Real-time record and dynamic display test curve
6.8 The software adopts human-computer interaction to analyze and count performance indicators of materials.
6.9 The software can automatically figure-out routine data such as tensile strength, yield strength, modulus of elasticity, extend rate after rupture, non-proportional extend strength et
Main manu
sample and speed control
7.Configurations:
7.1 High strength main unit--------------------------------------------------------------------------1 set
7.2 High precision arc synchronous deceleration system-----------------------------------1 suit
7.3 High precision ball screw------------------------------------------------------------------------2 pcs
7.4 Measurement control system------------------------------------------------------------------1 suit
7.5 High accuracy photoelectric encoder--------------------------------------------------------1 pc
7.6 AC Servo Motor and Control system(Japan Panasonic optional)----------------------1 suit
7.7 high precision load sensor(Amercian Transcell optional)--------------------------------1PC
7.8 Smart test software------------------------------------------------------------------------------1 suit
7.9 Tensile fixtures flat jaws 0-7mm & compression plate---------------------------------each 1set
7.11 Support table and cupboard ---------------------------------------------------------------1 set
7.12 Lenovo computer--------------------------------------------------------------------------------1 set
7.13HP printer-------------------------------------------------------------------------------------------1 set
8.Pictures for reference
Product Tags:
|
|
UTM 2kn 3kn 5kn 10 kn 200kn Computerized Universal Tensile Testing Machine Single Column utm Images
|
